• (updated version) DJI Mavic Gimbal Motor Overload Fix – Repairing Ribbon Cable
  • FixaCrash – Mavic Pro Gimbal Disassembly
  • DJI Mavic Pro gimbal ribbon cable replacement
«
»
Rating: 
Amazon Price: $19.99 $19.99 (as of March 23, 2018 4:45 am – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Customer Reviews

Mavic Pro Camera Harness

13 people found this helpful.
 on May 6, 2017
By Adrian Rodriguez Jr.
I am so freaking happy we can buy replacement parts for the Mavic Pro it’s not eve funny. If you are reading this review you are more than likely a drone owner so you know exactly what I mean. Who wantas to ship the drone back and forth, wait 2-3 weeks to get it back and then pay around 300+ between parts, labor and shipping. Screw that!!! This ribbon is usually among the first thing to fail in the mavic Pro. The section that loops up to the board from the camera doesn’t have a lot of slack so regardless of crashes this will brake. It’s only a matter of time really. I checked the reviews before buying my replacement and most claim it is super easy to do…..they are full it. The original harness plugs are glued down with some sort of RTV adhesive that you must remove before unplugging them. You have to be very careful with the whole replacement procedure, keep track of what goes where and don’t rush. Once it’s all done and said your drone will be as good as new as long as that was the problem obviously. Make sure you have the proper tools and good lighting.

Got my Mavic up and shooting again!

6 people found this helpful.
 on May 4, 2017
By ShirtGuy
After a minor crash my camera stopped responding and I got the dreaded motor overload error. Without really knowing the real problem I took a chance and ordered this cable to attempt to repair it myself. By some miracle swapping out the cable fixed the issue and the camera and gimbal are working perfect again.

A great "2 in 1" camera protector and gimbal brace

 on February 28, 2018
By ZombieKiller
A great “2 in 1” camera protector and gimbal brace. Secures the gimbal for transport and protects the camera assembly and lens while in the case.

Exactly what you’d expect. Great product. Too bad DJI can’t do a better job.

 on December 12, 2017
By Lac
Works perfectly. I would recommend pre-folding it before attempting installation (trust me it will make a big difference when trying to figure out how to thread it through) and buying some silicone glue. It has sticky backs which work fine, but I found it easier to just add a bit of silicone glue so it won’t come loose. Great product though that worked for me when I had to replace it after a crash.

A bit tricky!!!

One person found this helpful.
 on December 10, 2017
By Richard W. Haviland
The only issue I have, which is more like a request, is that it would be a huge help if a drawing could be provided that would indicate routing of the flat cable and how the cable is folded. By the time I figured it out i had to purchase another cable to replace the one I destroyed folding and refolding over and over trying to figure it out. This is certainly not the fault of FSLabs, DJI, or the folks in China that manufactured it. That leaves me and I don’t want to talk about it! LOL. Other than that, I am pleased with the quality and would recommend FS Labs to anyone.

Replace your original Gimbal Cover and Lock

One person found this helpful.
 on July 31, 2017
By Bill H.
This makes a nice replacement for the original cover with separate gimbal lock but it’s not that easy to get it on correctly. The two tabs need to go into the space between the camera and the gimbal while the gimbal is free to move around…

Arrived from seller in less than 36 hours and the price is great. Just be prepared to spend time on the …

One person found this helpful.
 on July 30, 2017
By Nicholas A. Galladora
Its either OEM or an exact replica of OEM. Arrived from seller in less than 36 hours and the price is great. Just be prepared to spend time on the installation, lots of small connectors that have a tendency to pop off.

The part arrived and was better than I expected

 on January 11, 2018
By Amazon Customer
The part arrived and was better than I expected. The original part seemed to be made out of a plastic you’re material and this part looks to be made out of aluminium. Crashing the stone was no fun but an when the replacement part is a perfect fit, life is good again. Drones up a n flying again. I’ll definitely use FSLabs again should I need to.

You need this product

 on February 9, 2018
By Wvb
I’ve always hated having to put that camera lock in place after flying. It is a two handed operation to hold the camera and the lock so I would have to kneel down on the ground to work on the Mavic. With this clamp one hand holds the Mavic and the other puts on the dome clamp. It is so easy